In short. An air conditioner can be removed and reinstalled elsewhere without losing refrigerant: before removal the technician pumps it down into the outdoor unit and closes the valves. Removal costs from 600 lei for the indoor unit and from 800 for the outdoor unit; relocation from 2 400 lei in one visit. Removed without pump-down, it will need evacuation and recharging at the new place, usually another 750–2,000 lei.

When you need it
- Moving house: you want to take the unit to your new flat or house.
- Rearranging: the unit is needed in another room or is badly placed.
- Renovation or facade insulation: the outdoor unit is removed before the work and put back after.
- Replacement: the old unit makes way for a new one.
Why keeping the refrigerant matters
Before removal the technician runs the unit and pumps all the refrigerant into the outdoor unit, then closes the valves and disconnects the line. Nothing escapes, and no moisture or air enters the circuit, so at the new place the unit starts without recharging.
Removed carelessly, the refrigerant is lost and moisture in the circuit shortens compressor life. At the new place it will need evacuation and recharging: labour 350 lei plus R32 at 200 lei per 100 g, usually 750–2,000 lei in total.
What it costs
| Item | Price |
|---|---|
| Indoor unit removal | 600–900 lei |
| Outdoor unit removal | 800–1,000 lei |
| Work from a lift (if the unit cannot be reached from a balcony or window) | 1,000–2,000 lei |
| Installation at the new place, room up to 35 m² | 1 600 lei |
| Installation, up to 55 m² / up to 80 m² | 2 200 lei / 2 400 lei |
| Full relocation: removal + installation in one visit | from 2 400 lei |
Removal price depends on capacity and access to the outdoor unit. Materials at the new place (line, brackets, trunking) are quoted after the survey, before work starts, with no extras afterwards. More on the removal and relocation pages.
How relocation works
- We pump the refrigerant into the outdoor unit, disconnect power and the line, and cap the ports.
- We remove both units and the brackets. The units stay with you — transport them yourself or arrange it with us.
- At the new place we drill the wall, lay a new line and drain, and mount the units.
- We evacuate the line, check for leaks, start the unit and show you it works.
Within the same flat it all takes 3–5 hours in one visit. The line in the old wall stays there; a new one is laid at the new spot.
Facade work and replacing an old unit
Insulating the facade or replacing windows? Remove the outdoor unit before the work and reinstall it after: it stays undamaged and the refrigerant stays in the circuit. You can move it to a better spot at the same time.
Replacing an old unit with a new one bought from us? Removal of the old one is included in the overall estimate. If the old one runs on R22 and keeps breaking down, we will tell you honestly what pays off, see repair.
Warranty
New installation: 2 years, up to 5 years with annual maintenance.